Locations and reports
Radon Levels in Livingston County, Kentucky
What this means for you
- Your area: EPA rates Livingston County Zone 2, the middle of its three radon zones. That is a prediction for the whole county, and homes with elevated levels occur in all three zones.
- Local tests: Of 11 radon tests reported to CDC for Livingston County (2008 to 2017), 0.0% were at or above 4 pCi/L, EPA's action level.
- Your home: The only way to know your home’s level is to test it.
pCi/L (picocuries per liter) is the unit radon is measured in. EPA recommends fixing a home at 4 pCi/L or above, its action level.
Over the 2008 to 2017 laboratory totals, 0.0% of the radon tests reported to CDC for Livingston County, Kentucky came back at or above the EPA action level of 4 pCi/L, and the median result was 1.3 pCi/L. EPA's Map of Radon Zones places the county in Zone 2, moderate predicted potential. Radon levels vary from home to home, so only a test measures the level in yours.
Predicted: EPA radon zone
EPA Zone 2: moderate predicted potential
EPA predicts an average indoor of 2 to 4 pCi/L (75 to 150 Bq/m³) across the county as a whole.
This is a county-level geologic prediction. It is not a measurement of any address, and houses with elevated radon are found in all three zones.
USGS geologic potential: Moderate across 99% of the county's land area
Predicted: EPA Map of Radon Zones
Measured: tests reported to CDC
Radon tests reported for Livingston County, 2008 to 2017, laboratory
- Tests reported
- 11
- At or above 4 pCi/L
- 0.0%
- Median result
- 1.3 pCi/L
Of 11 pre-mitigation tests reported to CDC, not homes in this area. CDC publishes the share in each band, not a count per band, so the per-band counts in the table are calculated by Radon411 and rounded to add up to the published total.
| Result band | Tests Calculated by Radon411 | Share Measured |
|---|---|---|
| Under 2 pCi/L | 7 | 63.6% |
| 2 to 4 pCi/L | 4 | 36.4% |
| 4 pCi/L and above | 0 | 0.0% |
Distribution of tested buildings, not this house. People testing before a sale, or because they suspect a problem, are over-represented in any reported testing data.
Measured: CDC tracking data. Figure above: 2008 to 2017, laboratory. Measured data period: 2005 to 2017 (every CDC figure on file).
Livingston County, In figures
Livingston County in figures
What the published data says about Livingston County, in words. A zone and a share of tests describe an area, never the level in any one home.
Predicted
PredictedEPA places Livingston County in Zone 2, moderate predicted potential, as it does 81 other counties of Kentucky's 120.
Of the 7 bordering counties, EPA places Crittenden County, Hardin County, Lyon County and Pope County in Zone 2 and Marshall County, Massac County and McCracken County in Zone 3.
Reported tests
MeasuredCDC publishes no annual figure for Livingston County; its figure is a laboratory total for 2008 to 2017: 0.0% of 11 reported tests were at or above 4 pCi/L.
Local record
Kentucky's radon program and its page are under Local resources.
The county's largest incorporated places are Salem, Grand Rivers and Smithland; the figures here cover them as part of the county.
Livingston County, Comparison
How Livingston County compares
MeasuredLivingston County's own published CDC figures beside those of the counties that border it, for the same period.
Share of reported tests at or above 4 pCi/L
Measured2008 to 2017, laboratory, highest first. Each county’s own published CDC figure.
- Lyon CountyKY14 tests35.7%
- Crittenden CountyKY8 tests25.0%
- Hardin CountyIL9 tests22.2%
- McCracken CountyKY28 tests21.4%
- Massac CountyIL33 tests15.2%
- Marshall CountyKY85 tests10.6%
- Livingston CountyThis page11 tests0.0%
- Pope CountyIL7 tests0.0%
Median reported result
Measured2008 to 2017, laboratory, highest first. Each county’s own published CDC figure.
- Lyon CountyKY14 tests2.5 pCi/L
- Massac CountyIL33 tests1.9 pCi/L
- Pope CountyIL7 tests1.8 pCi/L
- Crittenden CountyKY8 tests1.6 pCi/L
- McCracken CountyKY28 tests1.6 pCi/L
- Marshall CountyKY85 tests1.5 pCi/L
- Hardin CountyIL9 tests1.4 pCi/L
- Livingston CountyThis page11 tests1.3 pCi/L
Each figure is that county’s own published CDC figure for 2008 to 2017, laboratory, counting radon tests reported to CDC, not homes. Livingston County is this page. Nothing is averaged or combined across counties. The test count beside each county is CDC’s published number of pre-mitigation tests behind its figures. Figures from few tests can swing widely from year to year. Every Kentucky county’s own figure is in the Kentucky county table.
CDC publishes this figure only for counties here, so there is no state or national number to compare Livingston County, Kentucky with.
Livingston County, Bordering counties
Counties bordering Livingston County
Calculated by Radon4117 counties share a boundary with Livingston County, computed from Census county geometry. Radon potential follows geology rather than county lines, so a bordering county’s report can be worth reading alongside this one.
- Pope CountyILZone 2: Moderate predicted potential
- Crittenden CountyKYZone 2: Moderate predicted potential
- Lyon CountyKYZone 2: Moderate predicted potential
- Marshall CountyKYZone 3: Lower predicted potential
- Hardin CountyILZone 2: Moderate predicted potential
- Massac CountyILZone 3: Lower predicted potential
- McCracken CountyKYZone 3: Lower predicted potential
Livingston County, Local resources
Local resources in Kentucky
Who to ask in Kentucky: the state's radon program, test kits and professionals.
Kentucky's radon program
Kentucky Board of Radon Safety
Kentucky’s radon program answers questions about testing, mitigation and the rules where you live.
- Phone
- 502-782-2782
- Radon@ky.gov
Test kits
Ask the program whether it has free or discounted kits, or compare kits you can buy.
Radon professionals
12 professionals are listed in Kentucky.
Professionals in KentuckyLivingston County, Cities and towns
Cities and towns in Livingston County
The radon figures on this page are for Livingston County as a whole. They do not differ by city or town.
- Salem
- Grand Rivers
- Smithland
- Carrsville
4 incorporated places, as listed in the U.S. Census Bureau’s 2020 place reference files.
Livingston County, Questions
Questions about radon in Livingston County
Common questions8 questions, answered from the figures above
Are radon levels high in Livingston County?
In 2017, 0.0% of the radon tests reported to CDC for Livingston County, Kentucky were at or above 4 pCi/L, and the median reported pre-mitigation result was 1.3 pCi/L. That is a share of reported tests, not of homes. EPA places Livingston County in Zone 2, moderate predicted potential, a predicted average indoor screening level 2 to 4 pCi/L. Homes with elevated levels occur in all three zones, so the figures describe the area, not your house. Testing is the only way to know the radon level in a specific building.
How do I get a radon test in Livingston County?
EPA says you can test your home yourself or hire a qualified radon test company, and that either approach takes only a small amount of time and effort. No certified tester listed on Radon411 names Livingston County as a service area yet. The Kentucky radon program is the place to ask about certified testers and any test kit offer it runs.
How to test a homeTest kits comparedFree and low-cost kits by stateKentucky radon program
Who does radon mitigation in Livingston County?
No listed mitigator names Livingston County as a service area yet; the Kentucky directory lists 12 companies. EPA recommends having a qualified contractor fix a home with a radon problem, because lowering high radon levels takes technical knowledge and special skills, and some states require the work to be done by a licensed or certified professional. Your state radon program is the place to check whether Kentucky requires one.
How radon mitigation worksWhat mitigation costsMitigators in Kentucky
What EPA radon zone is Livingston County in?
EPA places Livingston County, Kentucky in Zone 2, which EPA describes as moderate predicted potential for the area. A zone is a prediction for the whole county and never determines whether a particular home should be tested. EPA recommends testing every home regardless of zone.
Should I test my home in Livingston County?
Yes. Testing is the only way to know the radon level in a specific building. EPA recommends fixing a home when the radon level is 4 pCi/L or higher. EPA recommends considering a fix when the level is between 2 and 4 pCi/L. How to test a home.
When is the best time of year to test?
EPA says short-term tests stay in the home from 2 to 90 days and that all radon tests should run a minimum of 48 hours; long-term tests stay more than 90 days. EPA's guides do not name a best season: they say radon levels tend to vary from day to day and season to season, so a long-term test is more likely than a short-term test to tell you the year-round average.
What does it cost to test?
EPA's Citizen's Guide calls testing easy and inexpensive, and EPA's Home Buyer's and Seller's Guide says passive short-term and long-term devices are generally inexpensive, while active devices may cost more. No national average price is published for this, so Radon411 does not give one. What testing costs.
Which counties border Livingston County?
Livingston County borders 7 counties, derived from Census county geometry. Radon potential follows geology rather than county lines, so a bordering county's report can be relevant.
What these figures mean if you own, buy, sell or rent
The reported-test figures on this page describe Livingston County, Kentucky in 2017. They describe tests other people carried out in other buildings, and none of them measures yours.
- How to test a home
If you own your home
Test the lowest lived-in level; a short-term kit screens in days, a long-term kit reflects the year.
- Buying a house: radon guide
If you are buying
Ask for past results and any system's post-mitigation test, and test during the sale.
- Selling a house: radon guide
If you are selling
Testing before you list puts the timing in your hands; disclosure rules differ by state.
- Radon in rental homes
If you rent, or rent out a home
A tenant can test; a fix is the owner's to make, and duties differ by state.
How long a test has to run, under what conditions, and what EPA says a result means: the testing standard, in full.
Livingston County, Products
Testing and mitigation products
Whatever the figures for Livingston County show, only a test tells you about one home.
Testing
- Short-term test kitsPassive detectors exposed for a few days under closed-building conditions, then analyzed by a lab.
- Long-term test kitsDetectors exposed for more than 90 days, for a closer picture of the annual average.
- Continuous monitorsPowered devices that log radon on a repeating cycle, often used for transaction tests.
- Digital detectorsConsumer devices that display a running radon reading without a lab.
- Water radon testsKits for radon dissolved in well water, analyzed by a lab.
Mitigation
- Mitigation fansThe inline fan that keeps a soil depressurization system running, sized by the installer.
- System indicatorsU-tube manometers and fan alarms that show whether a mitigation system is still working.
- Sealing materialsCrack, joint and sump sealing used alongside a mitigation system, not instead of one.
Livingston County / Next steps
What to do next
Learn
Know what radon is
What radon is, how it gets indoors, and why a county zone is not a reading for your home.
Learn about radonTest
Test the building you live in
Short-term or long-term, where the device goes, and closed-house conditions.
How to testFix
Bring a high level down
How a mitigation system works, and the retest that confirms it.
How mitigation worksFind a pro
Hire a certified professional
Measurement and mitigation professionals by state, with their certifications.
Find a professional
Informational. Follow EPA guidance. EPA says all radon tests should be taken for a minimum of 48 hours, with windows and doors closed from 12 hours before a short-term test.