Locations and reports
Radon Levels in Bienville Parish, Louisiana
What this means for you
- Your area: EPA rates Bienville Parish Zone 3, the lowest of its three radon zones. That is a prediction for the whole county, and homes with elevated levels occur in all three zones.
- Local tests: Of 3 radon tests reported to CDC for Bienville Parish (2016), 0.0% were at or above 4 pCi/L, EPA's action level.
- Your home: The only way to know your home’s level is to test it.
pCi/L (picocuries per liter) is the unit radon is measured in. EPA recommends fixing a home at 4 pCi/L or above, its action level.
In 2016, 0.0% of the radon tests reported to CDC for Bienville Parish, Louisiana came back at or above the EPA action level of 4 pCi/L, and the median result was 0.9 pCi/L. EPA's Map of Radon Zones places the county in Zone 3, lower predicted potential. Radon levels vary from home to home, so only a test measures the level in yours.
Predicted: EPA radon zone
EPA Zone 3: lower predicted potential
EPA predicts an average indoor of less than 2 pCi/L (less than 75 Bq/m³) across the county as a whole.
This is a county-level geologic prediction. It is not a measurement of any address, and houses with elevated radon are found in all three zones.
USGS geologic potential: High across 100% of the county's land area
Predicted: EPA Map of Radon Zones
Measured: tests reported to CDC
Radon tests reported for Bienville Parish, 2016
- Tests reported
- 3
- At or above 4 pCi/L
- 0.0%
- Median result
- 0.9 pCi/L
Of 3 pre-mitigation tests reported to CDC, not homes in this area. CDC publishes the share in each band, not a count per band, so the per-band counts in the table are calculated by Radon411 and rounded to add up to the published total.
| Result band | Tests Calculated by Radon411 | Share Measured |
|---|---|---|
| Under 2 pCi/L | 3 | 100.0% |
| 2 to 4 pCi/L | 0 | 0.0% |
| 4 pCi/L and above | 0 | 0.0% |
Distribution of tested buildings, not this house. People testing before a sale, or because they suspect a problem, are over-represented in any reported testing data.
Measured: CDC tracking data. Measured data period: 2016.
Bienville Parish, In figures
Bienville Parish in figures
What the published data says about Bienville Parish, in words. A zone and a share of tests describe an area, never the level in any one home.
Predicted
PredictedEPA places Bienville Parish in Zone 3, lower predicted potential, as it does 63 other counties of Louisiana's 64.
Of the 8 bordering counties, EPA places Bossier Parish, Claiborne Parish, Jackson Parish, Lincoln Parish, Natchitoches Parish, Red River Parish, Webster Parish and Winn Parish in Zone 3.
Reported tests
MeasuredCDC has one annual figure for Bienville Parish on file here, for 2016: 0.0% of 3 reported tests were at or above 4 pCi/L.
Local record
Louisiana's radon program and its page are under Local resources.
The county's largest incorporated places are Arcadia, Ringgold and Gibsland; the figures here cover them as part of the county.
Bienville Parish, Comparison
How Bienville Parish compares
MeasuredBienville Parish's own published CDC figures beside those of the counties that border it, for the same period.
Share of reported tests at or above 4 pCi/L
Measured2016, highest first. Each county’s own published CDC figure.
- Bienville ParishThis page3 tests0.0%
- Bossier ParishLA114 tests0.0%
- Lincoln ParishLA12 tests0.0%
Median reported result
Measured2016, highest first. Each county’s own published CDC figure.
- Bienville ParishThis page3 tests0.9 pCi/L
- Lincoln ParishLA12 tests0.5 pCi/L
- Bossier ParishLA114 tests0.2 pCi/L
Each figure is that county’s own published CDC figure for 2016, counting radon tests reported to CDC, not homes. Bienville Parish is this page. Nothing is averaged or combined across counties. The test count beside each county is CDC’s published number of pre-mitigation tests behind its figures. Figures from few tests can swing widely from year to year. No published CDC figure for 2016: Red River Parish, LA; Webster Parish, LA; Jackson Parish, LA; Claiborne Parish, LA; Winn Parish, LA; Natchitoches Parish, LA. Every Louisiana county’s own figure is in the Louisiana county table.
CDC publishes this figure only for counties here, so there is no state or national number to compare Bienville Parish, Louisiana with.
Bienville Parish, Bordering counties
Counties bordering Bienville Parish
Calculated by Radon4118 counties share a boundary with Bienville Parish, computed from Census county geometry. Radon potential follows geology rather than county lines, so a bordering county’s report can be worth reading alongside this one.
- Red River ParishLAZone 3: Lower predicted potential
- Webster ParishLAZone 3: Lower predicted potential
- Jackson ParishLAZone 3: Lower predicted potential
- Lincoln ParishLAZone 3: Lower predicted potential
- Bossier ParishLAZone 3: Lower predicted potential
- Claiborne ParishLAZone 3: Lower predicted potential
- Winn ParishLAZone 3: Lower predicted potential
- Natchitoches ParishLAZone 3: Lower predicted potential
Bienville Parish, Local resources
Local resources in Louisiana
Who to ask in Louisiana: the state's radon program, test kits and professionals.
Louisiana's radon program
Louisiana Department of Environmental Quality
Louisiana’s radon program answers questions about testing, mitigation and the rules where you live.
Visit the program's page(opens in a new tab)Test kits
Ask the program whether it has free or discounted kits, or compare kits you can buy.
Radon professionals
1 professional is listed in Louisiana.
Professionals in LouisianaBienville Parish, Cities and towns
Cities and towns in Bienville Parish
The radon figures on this page are for Bienville Parish as a whole. They do not differ by city or town.
- Arcadia
- Ringgold
- Gibsland
- Saline
- Lucky
- Castor
- Bienville
- Jamestown
- Bryceland
- Mount Lebanon
10 incorporated places, as listed in the U.S. Census Bureau’s 2020 place reference files.
Bienville Parish, Questions
Questions about radon in Bienville Parish
Common questions8 questions, answered from the figures above
Are radon levels high in Bienville Parish?
In 2016, 0.0% of the radon tests reported to CDC for Bienville Parish, Louisiana were at or above 4 pCi/L, and the median reported pre-mitigation result was 0.9 pCi/L. That is a share of reported tests, not of homes. EPA places Bienville Parish in Zone 3, lower predicted potential, a predicted average indoor screening level less than 2 pCi/L. Homes with elevated levels occur in all three zones, so the figures describe the area, not your house. Testing is the only way to know the radon level in a specific building.
How do I get a radon test in Bienville Parish?
EPA says you can test your home yourself or hire a qualified radon test company, and that either approach takes only a small amount of time and effort. No certified tester listed on Radon411 names Bienville Parish as a service area yet. The Louisiana radon program is the place to ask about certified testers and any test kit offer it runs.
How to test a homeTest kits comparedFree and low-cost kits by stateLouisiana radon program
Who does radon mitigation in Bienville Parish?
No listed mitigator names Bienville Parish as a service area yet; the Louisiana directory lists 1 company. EPA recommends having a qualified contractor fix a home with a radon problem, because lowering high radon levels takes technical knowledge and special skills, and some states require the work to be done by a licensed or certified professional. Your state radon program is the place to check whether Louisiana requires one.
How radon mitigation worksWhat mitigation costsMitigators in Louisiana
What EPA radon zone is Bienville Parish in?
EPA places Bienville Parish, Louisiana in Zone 3, which EPA describes as lower predicted potential for the area. A zone is a prediction for the whole county and never determines whether a particular home should be tested. EPA recommends testing every home regardless of zone.
Should I test my home in Bienville Parish?
Yes. Testing is the only way to know the radon level in a specific building. EPA recommends fixing a home when the radon level is 4 pCi/L or higher. EPA recommends considering a fix when the level is between 2 and 4 pCi/L. How to test a home.
When is the best time of year to test?
EPA says short-term tests stay in the home from 2 to 90 days and that all radon tests should run a minimum of 48 hours; long-term tests stay more than 90 days. EPA's guides do not name a best season: they say radon levels tend to vary from day to day and season to season, so a long-term test is more likely than a short-term test to tell you the year-round average.
What does it cost to test?
EPA's Citizen's Guide calls testing easy and inexpensive, and EPA's Home Buyer's and Seller's Guide says passive short-term and long-term devices are generally inexpensive, while active devices may cost more. No national average price is published for this, so Radon411 does not give one. What testing costs.
Which counties border Bienville Parish?
Bienville Parish borders 8 counties, derived from Census county geometry. Radon potential follows geology rather than county lines, so a bordering county's report can be relevant.
What these figures mean if you own, buy, sell or rent
The reported-test figures on this page describe Bienville Parish, Louisiana in 2016. They describe tests other people carried out in other buildings, and none of them measures yours.
- How to test a home
If you own your home
Test the lowest lived-in level; a short-term kit screens in days, a long-term kit reflects the year.
- Buying a house: radon guide
If you are buying
Ask for past results and any system's post-mitigation test, and test during the sale.
- Selling a house: radon guide
If you are selling
Testing before you list puts the timing in your hands; disclosure rules differ by state.
- Radon in rental homes
If you rent, or rent out a home
A tenant can test; a fix is the owner's to make, and duties differ by state.
How long a test has to run, under what conditions, and what EPA says a result means: the testing standard, in full.
Bienville Parish, Products
Testing and mitigation products
Whatever the figures for Bienville Parish show, only a test tells you about one home.
Testing
- Short-term test kitsPassive detectors exposed for a few days under closed-building conditions, then analyzed by a lab.
- Long-term test kitsDetectors exposed for more than 90 days, for a closer picture of the annual average.
- Continuous monitorsPowered devices that log radon on a repeating cycle, often used for transaction tests.
- Digital detectorsConsumer devices that display a running radon reading without a lab.
- Water radon testsKits for radon dissolved in well water, analyzed by a lab.
Mitigation
- Mitigation fansThe inline fan that keeps a soil depressurization system running, sized by the installer.
- System indicatorsU-tube manometers and fan alarms that show whether a mitigation system is still working.
- Sealing materialsCrack, joint and sump sealing used alongside a mitigation system, not instead of one.
Bienville Parish / Next steps
What to do next
Learn
Know what radon is
What radon is, how it gets indoors, and why a county zone is not a reading for your home.
Learn about radonTest
Test the building you live in
Short-term or long-term, where the device goes, and closed-house conditions.
How to testFix
Bring a high level down
How a mitigation system works, and the retest that confirms it.
How mitigation worksFind a pro
Hire a certified professional
Measurement and mitigation professionals by state, with their certifications.
Find a professional
Informational. Follow EPA guidance. EPA says all radon tests should be taken for a minimum of 48 hours, with windows and doors closed from 12 hours before a short-term test.