Locations and reports
Radon Levels in Richmond County, New York
What this means for you
- Your area: EPA rates Richmond County Zone 3, the lowest of its three radon zones. That is a prediction for the whole county, and homes with elevated levels occur in all three zones.
- Local tests: 1 buildings with radon tests reported to CDC for Richmond County (2023). CDC publishes no share above the action level here.
- Your home: The only way to know your home’s level is to test it.
pCi/L (picocuries per liter) is the unit radon is measured in. EPA recommends fixing a home at 4 pCi/L or above, its action level.
In 2023, the median radon test reported to CDC for Richmond County, New York was 0.1 pCi/L. EPA's Map of Radon Zones places the county in Zone 3, lower predicted potential. Radon levels vary from home to home, so only a test measures the level in yours.
Predicted: EPA radon zone
EPA Zone 3: lower predicted potential
EPA predicts an average indoor of less than 2 pCi/L (less than 75 Bq/m³) across the county as a whole.
This is a county-level geologic prediction. It is not a measurement of any address, and houses with elevated radon are found in all three zones.
USGS geologic potential: High across 85% of the county's land area
Predicted: EPA Map of Radon Zones
Measured: tests reported to CDC
Radon tests reported for Richmond County, 2023
- Buildings tested
- 1
- At or above 4 pCi/L
- Not available
- Median result
- 0.1 pCi/L
Distribution of tested buildings, not this house. People testing before a sale, or because they suspect a problem, are over-represented in any reported testing data.
Measured: CDC tracking data. Figure above: 2023. Measured data period: 2005 to 2023 (every CDC figure on file).
Richmond County, In figures
Richmond County in figures
What the published data says about Richmond County, in words. A zone and a share of tests describe an area, never the level in any one home.
Predicted
PredictedEPA places Richmond County in Zone 3, lower predicted potential, as it does 14 other counties of New York's 62.
Of the 3 bordering counties, EPA places Hudson County, Middlesex County and Union County in Zone 2.
Reported tests
MeasuredCDC has annual figures for Richmond County for 6 years, 2014 to 2020. In 2020, 0.0% of 1 reported tests were at or above 4 pCi/L.
Local record
New York's radon program is the Radon Program, run by New York State Department of Health; its contacts are under Local resources.
The county's largest incorporated place is New York; the figures here cover them as part of the county.
Richmond County, Reported testing
Reported testing over time
MeasuredNo figures are published for 2016, 2021 to 2022. The axis keeps the space for the missing years and the line is not drawn across it.
| Year | Median reported result | Highest reported result | Share of tests at or above 4 pCi/L |
|---|---|---|---|
| 2014 | 0.9 pCi/L | 3.5 pCi/L | 0.0% |
| 2015 | 1.3 pCi/L | 1.3 pCi/L | 0.0% |
| 2017 | 0.4 pCi/L | 0.4 pCi/L | 0.0% |
| 2018 | 1.6 pCi/L | 2.4 pCi/L | 0.0% |
| 2019 | 0.7 pCi/L | 1.2 pCi/L | 0.0% |
| 2020 | 1.0 pCi/L | 1.0 pCi/L | 0.0% |
| 2023 | 0.1 pCi/L | 0.1 pCi/L | No data |
What these figures count
Every percentage here is a share of radon tests reported to CDC for Richmond County in 2023. It is not a share of homes in Richmond County, and it is not a random sample: it counts only the tests people chose to run and that were reported.
The shares and the median are calculated from pre-mitigation tests. CDC also reports the number of buildings tested (1), a different count, so the two totals are not interchangeable.
Richmond County, State data
New York's own radon test data
MeasuredWhat New York's own agencies publish about radon tests in Richmond County, with their period. These are not CDC's figures and are never added to them.
What the New York State Department of Health reports for Richmond County
Indoor air radon testing data (Environmental Public Health Tracker): short-term charcoal canister tests requested through the NYSDOH Radon Program, presented as five-year rolling averages. Period: 2015-2019. The publisher also lists 15 earlier periods.
Share at or above 4 pCi/L
0%
Average result
1.0 pCi/L
Tests behind these figures
1.4 tests a year on average
- Every figure is a five-year rolling average: the average result is the rolling average of each year's mean, and the test count is an average per year.
- The data only include tests requested through the NYSDOH Radon Program, and therefore may not capture all radon tests performed in a county.
- The data include both screening tests and post-mitigation tests, as it is not always possible to tell them apart.
- Radon testing by homeowners is optional in New York, so the values may not be representative of every home in the county.
- These figures describe tests reported to the New York State Department of Health in this area. They count a different set of tests than CDC's figures and are not a reading of any one home.
Measured: New York State Department of Health data, 2015-2019.
Richmond County, Bordering counties
Counties bordering Richmond County
Calculated by Radon4113 counties share a boundary with Richmond County, computed from Census county geometry. Radon potential follows geology rather than county lines, so a bordering county’s report can be worth reading alongside this one.
Richmond County, Local resources
Local resources in New York
Who to ask in New York: the state's radon program, test kits and professionals.
Radon Program
New York State Department of Health
New York’s radon program answers questions about testing, mitigation and the rules where you live.
- Phone
- 518-402-7556
- radon@health.ny.gov
- Licensing of radon professionals
NYS does not certify or license radon testers.
Test kits
The program says: Providing patients with information about how low-cost test kits may be obtained from the Radon Program.
Radon professionals
12 professionals are listed in New York.
Professionals in New YorkRichmond County, Cities and towns
Cities and towns in Richmond County
The radon figures on this page are for Richmond County as a whole. They do not differ by city or town.
- New York (part)
One incorporated place, as listed in the U.S. Census Bureau’s 2020 place reference files. “(part)” marks a place that extends into another county.
Richmond County, Questions
Questions about radon in Richmond County
Common questions8 questions, answered from the figures above
Are radon levels high in Richmond County?
No CDC testing statistics are published here for Richmond County, New York yet. EPA places Richmond County in Zone 3, lower predicted potential, a predicted average indoor screening level less than 2 pCi/L. Homes with elevated levels occur in all three zones, so the figures describe the area, not your house. Testing is the only way to know the radon level in a specific building.
How do I get a radon test in Richmond County?
EPA says you can test your home yourself or hire a qualified radon test company, and that either approach takes only a small amount of time and effort. No certified tester listed on Radon411 names Richmond County as a service area yet. The New York radon program is the place to ask about certified testers and any test kit offer it runs.
How to test a homeTest kits comparedFree and low-cost kits by stateNew York radon program
Who does radon mitigation in Richmond County?
No listed mitigator names Richmond County as a service area yet; the New York directory lists 12 companies. EPA recommends having a qualified contractor fix a home with a radon problem, because lowering high radon levels takes technical knowledge and special skills, and some states require the work to be done by a licensed or certified professional. Your state radon program is the place to check whether New York requires one.
How radon mitigation worksWhat mitigation costsMitigators in New York
What EPA radon zone is Richmond County in?
EPA places Richmond County, New York in Zone 3, which EPA describes as lower predicted potential for the area. A zone is a prediction for the whole county and never determines whether a particular home should be tested. EPA recommends testing every home regardless of zone.
Should I test my home in Richmond County?
Yes. Testing is the only way to know the radon level in a specific building. EPA recommends fixing a home when the radon level is 4 pCi/L or higher. EPA recommends considering a fix when the level is between 2 and 4 pCi/L. How to test a home.
When is the best time of year to test?
EPA says short-term tests stay in the home from 2 to 90 days and that all radon tests should run a minimum of 48 hours; long-term tests stay more than 90 days. EPA's guides do not name a best season: they say radon levels tend to vary from day to day and season to season, so a long-term test is more likely than a short-term test to tell you the year-round average.
What does it cost to test?
EPA's Citizen's Guide calls testing easy and inexpensive, and EPA's Home Buyer's and Seller's Guide says passive short-term and long-term devices are generally inexpensive, while active devices may cost more. No national average price is published for this, so Radon411 does not give one. What testing costs.
Which counties border Richmond County?
Richmond County borders 3 counties, derived from Census county geometry. Radon potential follows geology rather than county lines, so a bordering county's report can be relevant.
What these figures mean if you own, buy, sell or rent
The EPA zone on this page describes Richmond County as a whole. It is a prediction for an area, and it does not measure your building.
- How to test a home
If you own your home
Test the lowest lived-in level; a short-term kit screens in days, a long-term kit reflects the year.
- Buying a house: radon guide
If you are buying
Ask for past results and any system's post-mitigation test, and test during the sale.
- Selling a house: radon guide
If you are selling
Testing before you list puts the timing in your hands; disclosure rules differ by state.
- Radon in rental homes
If you rent, or rent out a home
A tenant can test; a fix is the owner's to make, and duties differ by state.
How long a test has to run, under what conditions, and what EPA says a result means: the testing standard, in full.
Richmond County, Products
Testing and mitigation products
Whatever the figures for Richmond County show, only a test tells you about one home.
Testing
- Short-term test kitsPassive detectors exposed for a few days under closed-building conditions, then analyzed by a lab.
- Long-term test kitsDetectors exposed for more than 90 days, for a closer picture of the annual average.
- Continuous monitorsPowered devices that log radon on a repeating cycle, often used for transaction tests.
- Digital detectorsConsumer devices that display a running radon reading without a lab.
- Water radon testsKits for radon dissolved in well water, analyzed by a lab.
Mitigation
- Mitigation fansThe inline fan that keeps a soil depressurization system running, sized by the installer.
- System indicatorsU-tube manometers and fan alarms that show whether a mitigation system is still working.
- Sealing materialsCrack, joint and sump sealing used alongside a mitigation system, not instead of one.
Richmond County / Next steps
What to do next
Learn
Know what radon is
What radon is, how it gets indoors, and why a county zone is not a reading for your home.
Learn about radonTest
Test the building you live in
Short-term or long-term, where the device goes, and closed-house conditions.
How to testFix
Bring a high level down
How a mitigation system works, and the retest that confirms it.
How mitigation worksFind a pro
Hire a certified professional
Measurement and mitigation professionals by state, with their certifications.
Find a professional
Informational. Follow EPA guidance. EPA says all radon tests should be taken for a minimum of 48 hours, with windows and doors closed from 12 hours before a short-term test.